Honeywell HPFF12 Notification Appliance Circuit Expander Power Supply

Description

Honeywell HPFF12, Notification Appliance Circuit Expander Power SupplyCondition:* New Surplus Stock, In OEM Packaging. As Pictured. Additional Notes:* Primary Input Power: 120 Volt AC, 60 Hz, 5.4 Amp* Secondary Power: 24 Volt Operation; Two 7-24 AH Batteries* Battery Charging Capacity: up to 26 AH Batteries* HPFF12 Cabinet: Holds up to two 18 AH Batteries* Total Output Current: 12.0 Amp Max. * Standby Current: 0.075 Amp* Auxiliary Power Output: 2.0 Amp under all conditions* NAC Output Ratings: 24 Volt DC fully regulated 3.0 Amp Max per circuit (12.0 Amp Total)* End-of-Line Resistor Range: 1.9K to 25k Ohm, Watt. Product ships with 4 separate programming resistors. They are 3.9K (5 each – only need one for programming), 2.2K (1 each), 4.7K (1 each) and 10K (1 each).* Common Trouble: 2.0 Amp at 30 Volt DC* Relay Fail Relay: 2.0 Amp at 30 Volt DC* Input Control Circuits: Compatible with 12 and 24 Volt DC control panel NACs.* Input Control Current (Alarm): 5.68 mA @ 12 Volt DC, 12.28 mA @ 24 Volt DC* Temperature Rating: 32F To 120F (0C To 49C)* Relative Humidity: 10% To 93% Non-Condensing* Cabinet Dimensions: 16.65″ (W) x 19.0″ (H) x 5.2″ (D) (42.29 (W) x 48.26 (H) x 13.23 (D) cm)* Trouble indication for supervision of the following:- NAC circuits- Battery charger voltage- Auxiliary output- AC input- Earth ground faults * Optional two-hour delay for AC loss. * Separate Trouble and AC Fail Form-C relay contacts. * The Trouble Form-C relay contacts selectable for an immediate or a two hour delay with AC failure.* 26 AH Battery Charger Capability The wall cabinet supports Two 12 Volt 18 AH Batteries, while the multi-pack equipment cabinets support two 12 Volt, 12 AH Batteries. * NAC Overload Protection And Indication. * Provision for mounting a single (AOM-2SF) or six circuit addressable control modules (MMO-6SF) or relay modules (AOM-2RF) inside the enclosure. (Use the Mounting Kit P/N:90474).Honeywell HPFF12