Auto Forward – Reverse Cycling Motor Control – 12VDC

Description

Auto Forward – Reverse Cycling Motor Control – 12 Volt DCAdditional Notes:* Programmable timed control for motors & other cyclic uses. * Set Forward & Reverse running time. * Isolated Relay wired to reverse the polarity of the relay DPDT contacts. * Cycles Forward/Reverse as long as Board is Powered. * NOTE: Load Power must be removed to Stop motion, Removing Circuit Power stops the timmed cycle leaving motor running continous in one direction.* Load Power/Circuit Power are isolated* Circuit Working Voltage: DC 5-13 Volt * Working Current: 5 Volt : Forward: ~4ma/Reverse: ~36ma* 12 Volt : Forward: ~6ma/Reverse: ~44ma* Relay Load Rating: 30 Volt DC @ 2 Amp Max or 125 Volt AC @ 1 Amp Max.* Recommend 5-12 Volt DC Motor <2 Amp* Run time set by programming & 3 jumper selections for X1 to X8 running. X multiplier is same for both directions Forward & Reverse base time are independent* Forward time: up to ~5000 sec. (X1) to ~40000 (X8)* Reverse time: up to ~5000 sec. (X1) to ~40000 (X8)* Terminal Strips for Circuit (Board) Power, Load Power & Load* L: 2-1/8" x W: 7/8" x H: 5/8" MPJA37217 RL