P6000 – 13/16″ x 13/16″, 19 Gauge Channel

Description

19 Gauge, 13/16″ Wide Strut Channel P6000 is commonly used for light-duty and OEM applications.

Features:

• Product dimensions are 13/16″ wide x 13/16″ tall x 19 ga. thick, solid
• Punched holes are also available for ease of installation
• Light gauge
• Ideal for light-duty applications
• Our P6000 is available in Pre-Galvanized (PG), Plain (PL), Stainless Steel (SS) and Aluminum (EA).
• Made in the USA

Specifications

Beam Loading

Beam Loading – P6000
Span (in)	Max Allow. Uniform Load (lbs)	Deflection at Uniform Load (in)	Uniform Loading at Deflection	Lateral Bracing Reduction Factor
Span/180 (lbs)	Span/240 (lbs)	Span/360 (lbs)
18	230	0.06	230	230	180	0.90
24	170	0.11	170	150	100	0.80
30	140	0.18	130	100	70	0.80
36	110	0.24	90	70	50	0.63
42	100	0.35	70	50	30	0.63
48	80	0.42	50	40	30	0.52
54	80	0.60	40	30	20	0.52
60	70	0.72	30	20	20	0.45
66	60	0.82	30	20	10	0.45
72	60	1.06	20	20	10	0.40

Refer to the General Specifications for loading information.

Column Loading

Column Loading – P6000
Unbraced Height (in)	Allowable Load atSlot Face (lbs)	Max Column Load Applied at C.G.
K=0.65 (lbs)	K=0.80 (lbs)	K=1.0 (lbs)	K=1.2 (lbs)
18	600	1,660	1,400	1,100	860
24	490	1,300	1,010	740	590
30	420	990	740	560	450
36	340	770	590	450	370
42	300	630	490	380	310
48	260	540	420	330	270
54	240	470	370	290	KL/r>200
60	210	410	330	KL/r>200	KL/r>200
66	210	370	300	KL/r>200	KL/r>200
72	180	340	270	KL/r>200	KL/r>200

Refer to the General Specifications for loading information.

Elements of Section

Elements of Section – P6000
Area of Section	0.107 in2(0.7 cm2)
	Axis 1-1	Axix 2-2
Moment of Inertia (I)	0.009 in4(0.4 cm4)	0.012 in4(0.5 cm4)
Section Modulus (S)	0.020 in3(0.3 cm3)	0.029 in3(0.5 cm3)
Radius of Gyration (r)	0.295 in (0.7 cm)	0.333 in (0.8 cm)

General Specifications

Standard Lengths:

• 10 feet: 10’1/2″ (13 mm)
• 16 feet: 16’1/2″ (13 mm)

Load Data:

• All beam and column load data pertains to carbon steel and stainless steel channels.
• Load tables apply only to UNISTRUT brand channel. Look for “UNISTRUT” on the product.
• Load tables and charts are constructed to be in accordance with the SPECIFICATION FOR THE DESIGN OF COLD-FORMED STEEL STRUCTURAL MEMBERS 2007 EDITION published by the AMERICAN IRON AND STEEL INSTITUTE USING ASD METHOD.
• Loads are based on 33 ksi steel cold formed to 42 ksi.
• Safety Factor to Yield Strength is 1.67 for Beam Loads and 1.80 for Column Loads.
• Beam loads are based on a simple beam and are given as a total uniform load (W) in pounds. For proper calculation procedures, refer to ourBeam Load Calculation Guide.
• For bearing loads, reference ourbearing loads page.

Welds:

• Welded channels are spot welded 2″ (51 mm) or 3″ (76 mm) on-center.

Materials & Finishes

Materials & Finishes– Standard:

• Pregalvanized (PG): Conforms to ASTM A653 SS GR 33, G90.
• Unistrut Defender (DF): Conforms to ASTM A1046 SS GR 33
• Hot Dip Galvanized (HG): Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM A123
• Perma-Green (GR): Steel conforms to ASTM A1011 SS GR 33, E-Coat finish
• Perma-Gold (ZD): Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM B633, Type II SC3
• Plain (PL): Conforms to ASTM A1011 SS GR 33

Materials & Finishes– Special Metals:

• Stainless Steel, Type 304 (SS): ASTM A240, Type 304 *
• Stainless Steel, Type 316 (ST): ASTM A240, Type 316 *
• Aluminum (EA): ASTM B221, Type 6063-T6 (Extruded) *

* These materials have different physical properties and performance characteristics. Pleasecontact usfor design support.

Downloads

P6000 Cut Sheet

P6000 Beam BIM Model

P6000 Column BIM Model

P6000 BIM Model